Roof Rebedding Brisbane
Lock Down Your Ridge Capping the Right Way
If your ridge caps are loose, cracked, or sliding out of place, repointing on its own isn’t going to cut it.
That’s where proper roof rebedding comes in.
At Brisbane Roof Restoration, we’ve been rebedding roofs across the city for decades. We strip out the weak mortar sitting under your ridge caps and replace it with fresh, rock-solid bedding that locks everything tight, keeping your roof stable and watertight for years to come.

1) Roof Assessment & Report
We climb up and check everything. Ridge caps, bedding, pointing, tiles, and drainage. You’ll get clear photos and a quote without the sales nonsense.
2) Remove Old Bedding
We carefully lift your ridge caps and clear away every bit of the brittle bedding underneath. No skimming. No half jobs.
3) Lay New Bedding Mortar
Using high-strength cement, we reset every ridge cap perfectly in place. The mortar is shaped to hold caps steady and direct water the right way.
4) Let It Cure & Set
We give the bedding time to properly cure. No rushing. Solid bedding is the backbone of your ridge line, and we do it right.
5) Finish with Flexible Pointing
Once cured, we apply flexible pointing compound over all joints. This seals out water and handles natural movement without cracking.


